GreenCell Technologies Inc: Hydrocell

GreenCell Technologies Inc  is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process. The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Tek is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell Technologies’s advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer’s warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.

It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM’s the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load. The addition of Hydrogen gas increases that flame speed and allows for all the fuel in the cylinder to be burned during each combustion cycle. This increases the power produced during that cycle which results in a net savings in fuel use of 10% on average. Greenhouse Gas emissions are also reduced significantly as the major cause of those emissions is un-burnt fuel in the exhaust.

·         Average of 10% Fuel Savings

·         Produces Hydrogen on demand

·         Operates only when engine is running

·         Low Maintenance – requires water every 200 operating hours

·         Fail-Safe design – stores no Hydrogen

GreenCell Technologies: Pepsi Bottling Group Acquires Hydrogen-Injected Trucks

GreenCell Technologies, Canada: WYTHEVILLE, VA – The Pepsi Bottling Group's truck fleet in the New River Valley region of Virginia has added 21 hydrogen-injected trucks in an effort to boost fuel efficiency and reduce emissions. 
The trucks were purchased from Hydrogen Leasing Co., a subsidiary of Dynamic Fuel Systems' U.S. dealers, Hydrogen Fuel Systems Inc. 
GreenCell Technologies, Canada: Dynamic Fuel Systems Inc., based in Canada, provides a transportable hydrogen generator retrofit targeted for use in the heavy tractor trailer industry. 
The Pepsi Bottling Group's new hydrogen-injected trucks are equipped with Dynamic's Jetstar, an onboard portable hydrogen generator that injects small amounts of hydrogen into the air intake as a combustion stimulant. The process is designed to reduce nitrogen oxides and hydrocarbon emissions, resulting in more power and better fuel economy. 
GreenCell Tek Canada: "The expansion of our fleet of alternative-fuel vehicles in the New River Valley region signals our commitment to playing an active role in helping Virginia achieve its long-term energy and climate objectives," said Bill Reeser, vice president and general manager of Pepsi Bottling Group's Virginia market unit. "These investments will also generate future cost savings for PBG, making it a winning proposition for everyone involved."

GreenCell Technology is a Canadian company dedicated to designing and bringing to market, technology-based products in the alternative energy market. The current product is called the HydroCell, an on-board on-demand hydrogen generator engineered specifically for Diesel Transport Trucks.

The HydroCell produces Hydrogen Gas, on demand, and adds it to the air drawn into a diesel engine. This small quantity of Hydrogen has large effects on the combustion process. The result is approximately 10% fuel savings and up to a 60% reduction in greenhouse gas emissions (nitrous oxides, hydrocarbons and carbon monoxide).

GreenCell Technologies is also involved in the Solar Energy market. We are currently conducting research and developing strategies to open an alternative energy division that will offer product, consultation and installation services for the Canadian market.

GreenCell Tek Canada: The HYDROCELL system is a safe and reliable product designed exclusively for the Diesel Transport Truck market. The HYDROCELL draws only 25 Amps from the vehicles 12 Volt system and generates enough hydrogen through-out the entire RPM range to enhance combustion.

GreenCell’s advanced feedback system monitors several conditions and adjusts the electrolysis process, to provide safe and efficient production of Hydrogen gas. The system was designed to operate in a temperature range of -40 to +60C and has an in-cab indicator to show system status. Installation requires no modification to the engine and does not affect the manufacturer’s warranty. The only maintenance needed is the addition of distilled water every 250 hours of operation.

GreenCell Tek Canada: It has been proven in validated tests that adding Hydrogen to fuel in an internal combustion engine will increase the flame speed. At various RPM’s the fuel that is present in the cylinder is not completely burned during the combustion cycle due to the flame speed of petroleum based fuels and the amount of time the combustion cycle is allowed, due to engine speed and load. 

Greencell Technologies - Revolutionary LED lighting from Tritechnology™ illuminates the Green House Project

A ground breaking initiative by Huntingdonshire District Council called the Green House Project has opened in St Ives Cambridgeshire. Tritechnology™ are pleased to have supplied the LED lighting throughout the house.

The Optech 40 and Optech 60 LED modules have replaced conventional 40watt and 60watt lamps in all of the decorative ceiling lights ,wall lights and standard lamps throughout the property. Tritechnology™ Module 10 LED has been used in all of the ceiling recessed downlight products
The Optech 40 and Optech 60 is a revolutionary, energy efficient ultra compact new light source, combining the lifetime and reliability of the worlds leading LED technology, with the convenience and brightness of conventional lighting The Optech 40 consumes just 7 watts and the Optech 60 just 10 watts. Achieving energy savings in excess of 80%.
All electrical, thermal and optical issues have been considered in the design, resulting in a light source that is simply plug and play
Optech 40 or Optech 60 LED modules can replace the conventional lamp and lamp holder within the majority of commercially available light fittings.
With this method the energy saving is truly sustainable. Optech is British designed and British made. Tritechnology™ is a registered trademark. If you would like more information about how to purchase this product contact Peter Malt at peterm@esea.org.uk
The Greencell technologies - Home energy use in the UK is currently responsible for producing more than 27% of all carbon emissions.
Whereas progress to reduce this is being made by improving the energy performance of new build properties, we must face the huge challenge of addressing existing, older inefficient properties, many of which will still be standing and occupied by 2050.
Such inefficient homes account for more than 90% of the existing housing stock, which highlights the importance of adapting them to suit 21st century living. Improving the thermal efficiency of existing properties will not only help meet the challenges of climate change, it will help householders tackle rising fuel costs, encourage well being and a provide a healthier living environment.
As part of Huntingdonshire District Council’s commitment to reduce carbon emissions and tackle climate change, we have purchased two properties, which will be ‘sustainably’ refurbished and opened up to the public as demonstration homes.
In Huntingdonshire approximately 67,000 homes are privately owned. There is huge potential to improve the energy and water efficiency of the properties, which will help to reduce the district’s carbon footprint and bring existing homes up to a higher level of environmental performance.
The UK Government is committed to reducing carbon emissions by 80% by the year 2050.
If we are to reduce our carbon emissions and help slow down the effects of climate change we need a step change in our thinking – the way we live, travel and refurbish our properties plays a major part in that. It’s important for the Green House Project to demonstrate and influence sustainable refurbishment and to encourage a ‘low carbon lifestyle’.
The district council is working with the Building Research Establishment (BRE), whose expertise and guidance is integral to the project. The BRE will be providing the specifications for the improvements, which will be based around the results of extensive thermal and acoustic testing which has already been undertaken in both of the houses.
The Greencell technologies - The Green House Project will take a ‘whole house’ approach to refurbishment, starting with the building fabric and insulation, windows, heating systems, ventilation, water efficiency measures and the installation of renewable energy technology including solar thermal for hot water and solar photovoltaics (PV) for energy.

Greencell Other Technologies

GreenCell is committed to bio-sequestration technologies and to the development and roll out of world’s best bio-remediation products and clean energy generation advances. We are selecting technologies that truly fit into the "virtuous circle" credo and have minimal non-green outputs.

Article blog by Internet fraud watch on additional reading about Greencell Other Technologies. Avoid getting taken by Internet scams.

These technologies include the patented "GreenCell Clear" being launched in Europe, China and Australasia through local offices. A natural and safe L Plantarum Bacteria for use in organic waste management and freshwater treatment, this product is sold under an agreement with GreenCell in these regions.

GreenCell is also exploring gasification technologies which when coupled with the GNULs will provide clean and locally based power generation. Gasification is a good match with the GNUL modular designs and allows for conversion of community and industrial bio-based wastes into energy with the CO2 being reused as fuel.

Other technologies currently being evaluated include methane digestion and hydrocarbon bio-remediation.

GreenCell is committed to continuing to partner in the development of new green technology

The Gnul Process: other uses of the GNUL. The GNUL technology opens the door to multiple applications.

Algae types can handle most types of water and industrial waste.

We will find the GNUL designed into the infrastructure of tomorrow’s buildings.

GreenCell has completed preliminary trials on its methane digester design and has already had interest from commercial piggeries.

Further research with stand alone diesel motors has shown that the GNUL design is also effective in the elimination of oxides from the exhaust of stationary motors as well as lowering CO2 emissions.

GreenCell is also confident that the GNUL will be highly effective in the treatment of polluted water - utilizing algae in the same way as conventional methods but in a controlled and compact space. Use of the GNUL in aquaculture should reduce the blooms of red and blue/green algae and improve the growing conditions considerably.

GNULS are manufactured from recycled, everyday plastics and are specialty moulded using our exclusive patented process.

The same carbon neutral manufacturing process produces very low cost water tanks and methane digesters, which are they, recyclable.

These are used as component and ancillary parts of the whole system.

However they are stand-alone items in themselves as they can be “blown” to previously unachievable dimensions.

Metering is via an EPA standard environmental gas analyser.

GreenCell will continue to explore the potential of algae and bacteria in its role as environmental cleanser and is committed to developing the best bio-processor for each individual application.

About the GNUL

The World now realises what the Earth has been trying to say for some time…. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem.

Greencell Technologies A Solution for Coal-Fired Power Stations

The GNUL can be retrofitted to existing smokestacks, such as those at coal-fired power stations, at relatively low cost with minimal disruption.

Article blog by Internet fraud watch on additional reading about Greencell Technologies. Avoid getting taken by Internet scams and fraud.

The micro-algae lock up the carbon in their cells and these can be harvested from the GNUL and the lipids, proteins and carbohydrates then converted into biofuel, ethanol, methane or other useful products, using conventional methods.

Instead of Greenhouse gases being fed into the atmosphere, these are fed into GreenCell GNUL Bio-Processors and converted into usable forms of energy and other useful products including but not limited to: Light sweet crude, pharmaceutical grade amino fatty acids, proteins and oils, the bio mass can be further processed using the cellulous fiber for fabrics; plant, stock and fish food, it makes a high-density insulation material, it can be used to feed power stations as a supplement to coal, the water involved in the process is recycled and cleaned via the process to a natural standard.

GreenCell Technologies is confident that the GNUL will prove an effective way to reduce Greenhouse gas emissions at power stations and other industrial sites.

The Gnul Process: other uses of the GNUL

The GNUL technology opens the door to multiple applications.

Algae types can handle most types of water and industrial waste.

We will find the GNUL designed into the infrastructure of tomorrow’s buildings.

GreenCell has completed preliminary trials on its methane digester design and has already had interest from commercial piggeries.

Further research with stand alone diesel motors has shown that the GNUL design is also effective in the elimination of oxides from the exhaust of stationary motors as well as lowering CO2 emissions.

GreenCell is also confident that the GNUL will be highly effective in the treatment of polluted water - utilizing algae in the same way as conventional methods but in a controlled and compact space. Use of the GNUL in aquaculture should reduce the blooms of red and blue/green algae and improve the growing conditions considerably.

GNULS are manufactured from recycled, everyday plastics and are specialty moulded using our exclusive patented process.

The same carbon neutral manufacturing process produces very low cost water tanks and methane digesters, which are themselves, recyclable.

These are used as component and ancillary parts of the whole system. However they are stand-alone items in themselves as they can be “blown” to previously unachievable dimensions.

Metering is via an EPA standard environmental gas analyzer.

GreenCell will continue to explore the potential of algae and bacteria in its role as environmental cleanser and is committed to developing the best bio-processor for each individual application.

About the GNUL

The World now realizes what the Earth has been trying to say for some time. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem.

GreenCell Technologies -The Science

A good warning: minimizing use of land and other resources, GreenCell develops the GNUL Bio Processor

GreenCell Research Pty Ltd has now taken these ideas to the next level. Utilizing the intellectual property of Ian Wright, GreenCell Research Pty Ltd constructed a number of bio-processors at Yatala, Queensland to prove the concept. Scientists from the Atmospheric Research Facility at CSIRO, Australia’s national science agency, provided advice on algae selection. To minimize the use of land and water resources, a proprietary bio-processor was created to grow the algae. Invoplas Pty Ltd, a plastics R & D company, built the processors.

The final bio-processor has been named the GNUL - “lung” in reverse - breathing in CO2 and breathing out O2.

Between 1978 and 1996, the US Department of Energy funded research into technologies that could have significant impacts on the consumption of fossil fuels. The focus of this research became the Aquatic Species Program, which investigated renewable fuel production (bio-diesel) from high-oil algae species, fed by the waste CO2 from coal-fired power plants. Researchers whittled down over 3,000 strains of micro-organisms into the most productive 300, and constructed 1000 sq. meter test ponds outside of Roswell, NM.

The ponds were set up as sort of algae ‘race-tracks’, where algae were circulated around shallow, oval-shaped ponds as carbon dioxide bubbled through the mixture. Results were successful and in some ways encouraging, but the program was abandoned after almost two decades, as a result of budget constraints and a preference for allocating resources to researching ethanol as a substitute for low cost fossil fuels.

About the GNUL

The World now realizes what the Earth has been trying to say for some time…. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem. “BREATHE A LITTLE EASIER”

Hy-Drive Technologies Ltd. Seals Deal with GreenCell Tech - Yahoo! Finance

Hy-Drive Technologies Ltd. ("Hy-Drive") (CDNX:HGS.V) today announced that it has just signed a significant Distributor Agreement with GreenCell Technologies Inc. (GT5:GR ) that will combine the strengths of both companies and allow for stronger positioning in the energy solutions market.

Mississauga based Hy-Drive has developed a hydrogen-based Alternate Energy Combustion Control System for transport trucks that has demonstrated impressive results and passed extensive SAE testing. The system is designed with a control mechanism that regulates small amounts of hydrogen injected into the combustion chamber, thus enhancing the air/fuel mixture. The end result is lower emissions. GreenCell Technologies located in Aurora, Ontario trades on the Frankfurt Stock Exchange under the symbol GT5. They've created a similar product and are backed by a sound marketing system, which includes innovative financing options. The HydroCell is just one of several energy saving products that GreenCell is formulating.

"We can't be anything but excited about this agreement. Taking our technology and expertise, and combining it with GreenCell Technologies' multi-faceted energy background and marketing savvy, moves us a step closer to creating a greener world," said Robert Bucher, President and CEO of Hy-Drive.

Under the agreement, Hy-Drive will continue to focus on the product and cost efficiency. GreenCell will concentrate on marketing, service and sales. One of their top priorities will be further strengthening the sales team.

"We see this as a great opportunity to move forward with a solid product offering and to serve our customers in a timely and cost-effective way. Our marketing and sales team is very excited about the prospects," said K. Allen Etherington, President of GreenCell Technologies Inc.

"I recently pledged that Hy-Drive would expand through strong distribution deals and this marks the beginning of that plan. I'm confident our alliance with GreenCell Technologies will serve as a solid example of how two like-minded companies can work together to reach their specific goals," Robert Bucher added.

Pursuant to the Company's stock option plan and subject to TSXV approval, the Board of Directors issued 125,000 stock options to Officers of the Company at an exercise price of $1.00; all options shall vest immediately and expire ten years from the date of issuance.