Tuesday, February 21, 2012

Greencell Technologies - Revolutionary LED lighting from Tritechnology™ illuminates the Green House Project

A ground breaking initiative by Huntingdonshire District Council called the Green House Project has opened in St Ives Cambridgeshire. Tritechnology™ are pleased to have supplied the LED lighting throughout the house.
The Optech 40 and Optech 60 LED modules have replaced conventional 40watt and 60watt lamps in all of the decorative ceiling lights ,wall lights and standard lamps throughout the property. Tritechnology™ Module 10 LED has been used in all of the ceiling recessed downlight products
The Optech 40 and Optech 60 is a revolutionary, energy efficient ultra compact new light source, combining the lifetime and reliability of the worlds leading LED technology, with the convenience and brightness of conventional lighting The Optech 40 consumes just 7 watts and the Optech 60 just 10 watts. Achieving energy savings in excess of 80%.
All electrical, thermal and optical issues have been considered in the design, resulting in a light source that is simply plug and play
Optech 40 or Optech 60 LED modules can replace the conventional lamp and lamp holder within the majority of commercially available light fittings.
With this method the energy saving is truly sustainable. Optech is British designed and British made. Tritechnology™ is a registered trademark. If you would like more information about how to purchase this product contact Peter Malt at peterm@esea.org.uk
The Greencell technologies - Home energy use in the UK is currently responsible for producing more than 27% of all carbon emissions.
Whereas progress to reduce this is being made by improving the energy performance of new build properties, we must face the huge challenge of addressing existing, older inefficient properties, many of which will still be standing and occupied by 2050.
Such inefficient homes account for more than 90% of the existing housing stock, which highlights the importance of adapting them to suit 21st century living. Improving the thermal efficiency of existing properties will not only help meet the challenges of climate change, it will help householders tackle rising fuel costs, encourage well being and a provide a healthier living environment.
As part of Huntingdonshire District Council’s commitment to reduce carbon emissions and tackle climate change, we have purchased two properties, which will be ‘sustainably’ refurbished and opened up to the public as demonstration homes.
In Huntingdonshire approximately 67,000 homes are privately owned. There is huge potential to improve the energy and water efficiency of the properties, which will help to reduce the district’s carbon footprint and bring existing homes up to a higher level of environmental performance.
The UK Government is committed to reducing carbon emissions by 80% by the year 2050.
If we are to reduce our carbon emissions and help slow down the effects of climate change we need a step change in our thinking – the way we live, travel and refurbish our properties plays a major part in that. It’s important for the Green House Project to demonstrate and influence sustainable refurbishment and to encourage a ‘low carbon lifestyle’.
The district council is working with the Building Research Establishment (BRE), whose expertise and guidance is integral to the project. The BRE will be providing the specifications for the improvements, which will be based around the results of extensive thermal and acoustic testing which has already been undertaken in both of the houses.
The Greencell technologies - The Green House Project will take a ‘whole house’ approach to refurbishment, starting with the building fabric and insulation, windows, heating systems, ventilation, water efficiency measures and the installation of renewable energy technology including solar thermal for hot water and solar photovoltaics (PV) for energy.

Greencell Technologies - HeatingSave helps the Green Houses and Cambs Fire save money

HeatingSave is a low-cost, revolutionary Energy Management System that saves between 15% and 30%+ off the energy used to heat and light your home. It’s controller, which replaces the central heating timeclock, contains a computer program that learns, and constantly refines, the heat loss profile of your house so that it uses the least amount of energy.
At 25 Manor Road, St Neots, the HeatingSave system is using HeatingSaves’ glass evacuated solar tubes to heat the hot water using the suns rays. As HeatingSave is controlling both the boiler and the solar panel, it is able to make further economies by using the free energy from the sun as much as possible. The heating is turned up or down automatically depending upon the heat loss profile of the house and the outside temperature, whilst the occupancy sensors automatically turn up and down the heating depending on whether anyone is at home. The same occupancy sensors automatically turn lights on/off, this time saving money off the electricity bill. The immersion heater is also controlled by HeatingSave, allowing the home owner the vary the hot water temperature; hot for the baths/showers in the morning and cooler in the day for washing up, hand-washing and the washing machine. All saving energy and money, but leaving you firmly in control. Linked to the HeatingSave controller is a PC where the householder can change settings, view daily costings to help with the household budget and view the energy savings graphs – so you can see that the system is actually working and saving you money. The HeatingSave system is linked to the Internet so you can control, set and view how well your energy management system is working – from anywhere in the world.
At 1 St Audrey Lane, St Ives the HeatingSave system is controlling the Dimplex flat solar panel and the Dimplex air heat source pump. There is no central heating boiler, with heat being extracted solely from the outside air temperature and the suns rays. HeatingSave applies the same type of control at 1 St Audrey Lane as at 25 Manor Road. Again the Tensor access control system links to HeatingSave so that the energy management system “knows” when the house is occupied or empty.
HeatingSave is a government approved by the Carbon Trust and the Energy Savings Trust to save money on your energy usage. It is also an approved product on the lord mayor of London’s “London Green500” scheme.
HeatingSave are also helping Cambridgeshire Fire Service to reduce their heating bills, more information can be found on the Hunts Post website
The Greencell technologies - The Green House Project will take a ‘whole house’ approach to refurbishment, starting with the building fabric and insulation, windows, heating systems, ventilation, water efficiency measures and the installation of renewable energy technology including solar thermal for hot water and solar photovoltaics (PV) for energy.

GreenCell Technologies -The Science

A good warning: minimizing use of land and other resources, GreenCell develops the GNUL Bio Processor
GreenCell Research Pty Ltd has now taken these ideas to the next level. Utilizing the intellectual property of Ian Wright, GreenCell Research Pty Ltd constructed a number of bio-processors at Yatala, Queensland to prove the concept. Scientists from the Atmospheric Research Facility at CSIRO, Australia’s national science agency, provided advice on algae selection. To minimize the use of land and water resources, a proprietary bio-processor was created to grow the algae. Invoplas Pty Ltd, a plastics R & D company, built the processors.
The final bio-processor has been named the GNUL - “lung” in reverse - breathing in CO2 and breathing out O2.

Between 1978 and 1996, the US Department of Energy funded research into technologies that could have significant impacts on the consumption of fossil fuels. The focus of this research became the Aquatic Species Program, which investigated renewable fuel production (bio-diesel) from high-oil algae species, fed by the waste CO2 from coal-fired power plants. Researchers whittled down over 3,000 strains of micro-organisms into the most productive 300, and constructed 1000 sq. meter test ponds outside of Roswell, NM.
The ponds were set up as sort of algae ‘race-tracks’, where algae were circulated around shallow, oval-shaped ponds as carbon dioxide bubbled through the mixture. Results were successful and in some ways encouraging, but the program was abandoned after almost two decades, as a result of budget constraints and a preference for allocating resources to researching ethanol as a substitute for low cost fossil fuels.
About the GNUL
The World now realizes what the Earth has been trying to say for some time…. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem. “BREATHE A LITTLE EASIER”

Tuesday, February 7, 2012

Greencell Technologies A Solution for Coal-Fired Power Stations

The GNUL can be retrofitted to existing smokestacks, such as those at coal-fired power stations, at relatively low cost with minimal disruption.
Article blog by Internet fraud watch on additional reading about Greencell Technologies. Avoid getting taken by Internet scams and fraud.
The micro-algae lock up the carbon in their cells and these can be harvested from the GNUL and the lipids, proteins and carbohydrates then converted into biofuel, ethanol, methane or other useful products, using conventional methods.
Instead of Greenhouse gases being fed into the atmosphere, these are fed into GreenCell GNUL Bio-Processors and converted into usable forms of energy and other useful products including but not limited to: Light sweet crude, pharmaceutical grade amino fatty acids, proteins and oils, the bio mass can be further processed using the cellulous fiber for fabrics; plant, stock and fish food, it makes a high-density insulation material, it can be used to feed power stations as a supplement to coal, the water involved in the process is recycled and cleaned via the process to a natural standard.
GreenCell Technologies is confident that the GNUL will prove an effective way to reduce Greenhouse gas emissions at power stations and other industrial sites.
The Gnul Process: other uses of the GNUL
The GNUL technology opens the door to multiple applications.
Algae types can handle most types of water and industrial waste.
We will find the GNUL designed into the infrastructure of tomorrow’s buildings.
GreenCell has completed preliminary trials on its methane digester design and has already had interest from commercial piggeries.
Further research with stand alone diesel motors has shown that the GNUL design is also effective in the elimination of oxides from the exhaust of stationary motors as well as lowering CO2 emissions.
GreenCell is also confident that the GNUL will be highly effective in the treatment of polluted water - utilizing algae in the same way as conventional methods but in a controlled and compact space. Use of the GNUL in aquaculture should reduce the blooms of red and blue/green algae and improve the growing conditions considerably.
GNULS are manufactured from recycled, everyday plastics and are specialty moulded using our exclusive patented process.
The same carbon neutral manufacturing process produces very low cost water tanks and methane digesters, which are themselves, recyclable.
These are used as component and ancillary parts of the whole system. However they are stand-alone items in themselves as they can be “blown” to previously unachievable dimensions.

Metering is via an EPA standard environmental gas analyzer.

GreenCell will continue to explore the potential of algae and bacteria in its role as environmental cleanser and is committed to developing the best bio-processor for each individual application.

About the GNUL

The World now realizes what the Earth has been trying to say for some time. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem.

Greencell Other Technologies

GreenCell is committed to bio-sequestration technologies and to the development and roll out of world’s best bio-remediation products and clean energy generation advances. We are selecting technologies that truly fit into the "virtuous circle" credo and have minimal non-green outputs.

Article blog by Internet fraud watch on additional reading about Greencell Other Technologies. Avoid getting taken by Internet scams.

These technologies include the patented "GreenCell Clear" being launched in Europe, China and Australasia through local offices. A natural and safe L Plantarum Bacteria for use in organic waste management and freshwater treatment, this product is sold under an agreement with GreenCell in these regions.

GreenCell is also exploring gasification technologies which when coupled with the GNULs will provide clean and locally based power generation. Gasification is a good match with the GNUL modular designs and allows for conversion of community and industrial bio-based wastes into energy with the CO2 being reused as fuel.

Other technologies currently being evaluated include methane digestion and hydrocarbon bio-remediation.
GreenCell is committed to continuing to partner in the development of new green technology
The Gnul Process: other uses of the GNUL. The GNUL technology opens the door to multiple applications.
Algae types can handle most types of water and industrial waste.
We will find the GNUL designed into the infrastructure of tomorrow’s buildings.
GreenCell has completed preliminary trials on its methane digester design and has already had interest from commercial piggeries.
Further research with stand alone diesel motors has shown that the GNUL design is also effective in the elimination of oxides from the exhaust of stationary motors as well as lowering CO2 emissions.
GreenCell is also confident that the GNUL will be highly effective in the treatment of polluted water - utilizing algae in the same way as conventional methods but in a controlled and compact space. Use of the GNUL in aquaculture should reduce the blooms of red and blue/green algae and improve the growing conditions considerably.
GNULS are manufactured from recycled, everyday plastics and are specialty moulded using our exclusive patented process.
The same carbon neutral manufacturing process produces very low cost water tanks and methane digesters, which are they, recyclable.
These are used as component and ancillary parts of the whole system.
However they are stand-alone items in themselves as they can be “blown” to previously unachievable dimensions.
Metering is via an EPA standard environmental gas analyser.
GreenCell will continue to explore the potential of algae and bacteria in its role as environmental cleanser and is committed to developing the best bio-processor for each individual application.
About the GNUL

The World now realises what the Earth has been trying to say for some time…. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem.

Greencell Technologies A Solution for Coal-Fired Power Stations

The GNUL can be retrofitted to existing smokestacks, such as those at coal-fired power stations, at relatively low cost with minimal disruption.
Article blog by Internet fraud watch on additional reading about Greencell Technologies. Avoid getting taken by Internet scams and fraud.
The micro-algae lock up the carbon in their cells and these can be harvested from the GNUL and the lipids, proteins and carbohydrates then converted into biofuel, ethanol, methane or other useful products, using conventional methods.
Instead of Greenhouse gases being fed into the atmosphere, these are fed into GreenCell GNUL Bio-Processors and converted into usable forms of energy and other useful products including but not limited to: Light sweet crude, pharmaceutical grade amino fatty acids, proteins and oils, the bio mass can be further processed using the cellulous fiber for fabrics; plant, stock and fish food, it makes a high-density insulation material, it can be used to feed power stations as a supplement to coal, the water involved in the process is recycled and cleaned via the process to a natural standard.
GreenCell Technologies is confident that the GNUL will prove an effective way to reduce Greenhouse gas emissions at power stations and other industrial sites.
The Gnul Process: other uses of the GNUL
The GNUL technology opens the door to multiple applications.
Algae types can handle most types of water and industrial waste.
We will find the GNUL designed into the infrastructure of tomorrow’s buildings.
GreenCell has completed preliminary trials on its methane digester design and has already had interest from commercial piggeries.
Further research with stand alone diesel motors has shown that the GNUL design is also effective in the elimination of oxides from the exhaust of stationary motors as well as lowering CO2 emissions.
GreenCell is also confident that the GNUL will be highly effective in the treatment of polluted water - utilizing algae in the same way as conventional methods but in a controlled and compact space. Use of the GNUL in aquaculture should reduce the blooms of red and blue/green algae and improve the growing conditions considerably.
GNULS are manufactured from recycled, everyday plastics and are specialty moulded using our exclusive patented process.
The same carbon neutral manufacturing process produces very low cost water tanks and methane digesters, which are themselves, recyclable.
These are used as component and ancillary parts of the whole system. However they are stand-alone items in themselves as they can be “blown” to previously unachievable dimensions.

Metering is via an EPA standard environmental gas analyzer.

GreenCell will continue to explore the potential of algae and bacteria in its role as environmental cleanser and is committed to developing the best bio-processor for each individual application.

About the GNUL

The World now realizes what the Earth has been trying to say for some time. It is running out of breath and now is the time to act, before it is too late. The GreenCell GNUL bio-processor - which can be built into the infrastructure that creates our greenhouse gases - turns our worst problem into our greatest asset. The GNUL replicates lungs that breathe in CO2 and other polluting elements and breathes out sweet oxygen, cleans water for re-use and turns bio-waste into useful by-products. It’s what nature has been doing since life on earth began. A low-energy natural process with measurable results. Now we can all be part of a solution, instead of the problem.

Tuesday, January 31, 2012

GT5 GreenCell Technologies: Hy-Drive Technologies Ltd. Seals Deal with GreenCell Tech

MISSISSAUGA, ON, Jan. 11 /PRNewswire/ - Hy-Drive Technologies Ltd. ("Hy-Drive") (TSXV: HGS) today announced that it has just signed a significant Distributor Agreement with GreenCell Technologies Inc. (GT5:GR ) that will combine the strengths of both companies and allow for stronger positioning in the energy solutions market.
Mississauga based Hy-Drive has developed a hydrogen-based Alternate Energy Combustion Control System for transport trucks that has demonstrated impressive results and passed extensive SAE testing. The system is designed with a control mechanism that regulates small amounts of hydrogen injected into the combustion chamber, thus enhancing the air/fuel mixture. The end result is lower emissions. GreenCell Technologies located in Aurora, Ontario trades on the Frankfurt Stock Exchange under the symbol GT5. They've created a similar product and are backed by a sound marketing system, which includes innovative financing options. The HydroCell is just one of several energy saving products that GreenCell is formulating.
"We can't be anything but excited about this agreement. Taking our technology and expertise, and combining it with GreenCell Technologies' multi-faceted energy background and marketing savvy, moves us a step closer to creating a greener world," said Robert Bucher, President and CEO of Hy-Drive.
Under the agreement, Hy-Drive will continue to focus on the product and cost efficiency. GreenCell will concentrate on marketing, service and sales. One of their top priorities will be further strengthening the sales team.
"We see this as a great opportunity to move forward with a solid product offering and to serve our customers in a timely and cost-effective way. Our marketing and sales team is very excited about the prospects," said K. Allen Etherington, President of GreenCell Technologies Inc.
"I recently pledged that Hy-Drive would expand through strong distribution deals and this marks the beginning of that plan. I'm confident our alliance with GreenCell Technologies will serve as a solid example of how two like-minded companies can work together to reach their specific goals," Robert Bucher added.
Pursuant to the Company's stock option plan and subject to TSXV approval, the Board of Directors issued 125,000 stock options to Officers of the Company at an exercise price of $1.00; all options shall vest immediately and expire ten years from the date of issuance.
About Hy-Drive
Hy-Drive is a technology company headquartered in Mississauga, Ontario, Canada. The Company has invested in the research and development of hydrogen and control technology resulting in a proprietary, patented and patent-pending hydrogen generating system ("HGS®") and advancement in multi-fuel universal combustion controls. Hy-Drive's HGS enriches the fuel-air charge of an internal combustion engine with hydrogen produced through electrolysis and uses its proprietary software controls to improve combustion of the fuel-air mixture. The result is improved fuel economy and reduced opacity (particulates). For more information, please visit www.hy-drive.com.
Cautionary Note Regarding Forward-Looking Statements:
This press release contains certain forward-looking statements that are based upon current expectations, which involve risks and uncertainties associated with the Company's business, and the economic environment in which the business operates. Forward-looking statements contained in this press release that are not statements of historical fact may be deemed to be forward-looking statements including but not limited to, statements about future development of Hy-Drive's products, commercial production in 2011, future working capital requirements, and validation of Hy-Drive's products, and can be identified by the use of forward-looking terminology such as "plans", "expects", or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", or "does not anticipate", "thinks", or "believes" or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "might", or "will be taken", "occur", or "be achieved" and similar expressions to the extent that they relate to the Company or its management. These forward-looking statements are not historical facts, but reflect the Company's current expectations regarding future results or events. These forward-looking statements are subject to a number of risks and uncertainties that could cause actual results or events to differ materially from current expectations, including the matters discussed in the section "Risks and Uncertainties" below.
Although Hy-Drive has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information.  Hy-Drive does not undertake to update any forward-looking information that is incorporated by reference herein, except in accordance with applicable securities laws.
The TSX Venture Exchange has in no way passed upon the merits of the proposed transaction and has neither approved nor disapproved the contents of this press release. The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this release.